Fitting a cat flap can seem intimidating but it's easy to do with the proper instructions. Decide how high you'd like the flap to be (normally, it is at the belly height). Note this on your door and then use the included template as a guide when drilling.

If you have a young kitten you can prop the door slightly open and gradually encourage it to enter. Reward it each time it goes through wall cat flap.

Take a measurement of the door

A cat flap lets your pet to enter and exit your home at the time that is convenient for you. This can keep your cat flap installation bristol healthy since it will ensure it is exercising regularly and will also allow it to go back inside if it gets trapped in the elements during bad weather. This will cut down on the time you spend letting your cat out or in, and keep your home safer by notifying you when it's gone.

It is important to ensure that the cat flap is installed correctly in order to prevent your pet from being forced through it or escaping by other animals (e.g. dogs). It is essential to measure your pet's belly height and the entrance to your home to make sure that the flap is at the proper height. If your cat is larger or shorter than the average, you can alter the flap's position by moving it up or down by a tiny amount.

The next step is to use a spirit level to mark the centre of the door where you will put the flap. Then, using the markings as an indication, cut out the contour of your flap on the door with the aid of a Jigsaw. After you've cut the space, sand down the edges of the door to create smooth surfaces and drill any fixing holes needed.

Fitting a cat flap should not take longer than two hours. However, the process may be slightly more complicated when you have to install it inside a uPVC or composite door since these doors have a wide range of thicknesses, which affect how the holes are cut and what they are fixed into. This is why we recommend calling a professional to carry out the work, particularly if you have never worked with glass before.

Measure Your Cat

You can avoid hours of listening to the pet's meow to be allowed in or out. This is particularly helpful when your cat is inside in all weathers while you work.

It is crucial to first measure your cat before attempting to install. Although it might seem like an easy task, it is important to measure the right way or your pet will find it difficult to use.

First, make sure that your cat is calm before you begin taking measurements. You'll need to keep them in a position where they cannot move and make sure that the ruler or measuring tape is flat against their body, not bending in any place. Holding the ruler or measuring tape against their body from their head to the bottom of their tail will enable you to make an accurate measurement.

Once you've figured out the measurements of your cat, it is time to look at the door and decide where you want to place the flap. It is advisable to place the flap in the middle of your cat's belly because thincludes an outline of paper, place it on top of the door and use the marks to drill holes in each corner of the template. Then, you should be able cut out the template shape and replace it with the flap for cats.

You can install the cat flap fitters flap yourself in a wood or uPVC door If you're comfortable with the jigsaw. Be sure to not cut into any of the door mullions or vertical rails. You can use a jigsaw to cut your panel into a square or a circle depending on the way you'd like it. Remember to take your time and don't try to make the jigsaw cut faster.

Once the hole is cut, carefully place your cat flap into its new place of residence. Make sure it's solidly secured. If it has screw caps, then push them onto the screws that protrude. Once the screws are in place, sand the rough edges of the cut and then seal any gaps to ensure that there aren't any draughts entering into your home.

Install the Flap

If you have a simple cat flap, you can open it and encourage your pet to walk through by putting a small amount of cat food in the front of the door. Alternately, you can push the cat through with your hands or a stick. Once your cat is accustomed to moving through the flap, it is likely to be able into and out as it pleases, so you can let it in or out without holding the door open to allow it in all day (and likely in all weather conditions).

It is possible to install the flap inside a UPVC door or a glass door, however it might not be as simple as putting one in a wooden external door. This is due to the fact that UPVC doors and some types of glass doors don't have an even thickness. This could have a significant impact on the way you cut the flap's hole and whether the flap will fit correctly after installation.

The mounting kit could contain a template that outlines the best places to drill holes. If the kit doesn't come with an example you can use a photocopier to create your own. When cutting, it's crucial to keep the jigsaw from being pushed too hard so that you don't create a larger hole than you need in your door.

The majority of cat flaps are square or rectangular in shape, however there are some that are circular, and are typically more difficult to fit. If you have a round flap, make sure the hole is located in the correct place on your door. If not, your cat may not be able to access it, and might be outside all day (or at night).

Certain models of cat flaps come with locks that allow you to regulate the time your cat comes and goes. This is useful if your pet is afraid of leaving in the dark, or coming back inside at night. They are also useful for those who work all day. Some locks can be used to lock access or exit, and others can be locked both ways. This is helpful for sick or elderly cats who do not want to go outside in bad weather.