how to replace subaru key fob to Programming a subaru immobilizer key programming Key Fob at Home

Depending on how old your Subaru is, you may require having the key fob programmed by a dealer or an automotive locksmith. This is done by connecting a computer-based programming machine to your vehicle.

To program your Subaru, unlock the door on the driver's side by pressing the door button and then close it. You will hear a chime in the instrument panel, and the dome lights will light up.

Step 1: Find the circuit board for your transmitter

There are many ways to program your keyfob. First, you need to determine what kind of key fob you own. This can be done by looking at the shape of the key fob or by listening for a siren in your car.

Once you have the data and have it, you can begin the process of programming your keyfob at home. You will need a flathead and a metal key for this. Open the key fob case by twisting it. Then push the key in and release the battery from the small tabs that secure it. Replace the battery with a new one and then put the key fob case back together.

Step 2 Step 2: Unscrew your Key Fob Case

Change the battery is a smart idea as it can bring back key fobs which aren't working anymore. In some instances the buttons on the key fob might be damaged. If you can see that the button's contacts made of metal have been damaged then you can try reconnecting them to ensure that they function properly.

Before you start the process, make sure your car's doors are shut and the ignition is turned off. Close the driver's side doors and press your door button 10 times in rapid succession. Then you'll hear the instrument panel chime and your dome light should flash. This indicates that you are ready to move on.

Step 3: Put the Key Fob in the Ignition

Many online articles will teach you how to program your new or replacement subaru Key lost subaru key fob keyfob at home. However, the majority of them do not provide precise instructions. A professional auto dealer or locksmith in Fort Bliss is the best alternative for reprogramming a digital car key.

Sit in the driver's seat, with all doors closed and the engine off. Use the door button to unlock all the doors. Open and close the driver's door three times. Then insert and remove the key from the ignition switch (don't turn it) 10 times in 40 seconds. The system will chirp if the settings are changed.

Step 4: Turn the Ignition On

It is crucial to understand that this method of programming a key fob works if you already have a working key. If you don't then a dealer or auto-locksmith will have to program the key fob for your Subaru Fort Bliss.

Once the key has been />For some owners, the annoying noise that occurs when locking and unlocking a subaru legacy replacement key key fob from outside the vehicle can become distracting. In certain situations the chirp may be disabled by opening and closing all doors, and then a double-click of the lock button on the key fob.

Close all doors, including the lid for the fuel-filler, and switch off the ignition. Press and hold the lock side of the key fob's lock button for 10 seconds. When this is done the instrument panel emits an audible chime. The chime indicates that the door and fuel-filler lid are locked. It is possible to change the setting so that doors lock automatically without pressing a switch.

Step 8 Step 8: Enter the 8-digit Transmitter Number.

Note down the initial series of 8-digits and keep it handy. Now, get into the driver's seat, close the doors and turn the key in the first position. After ten turns, the instrument panel should begin to sound at least once.

The circuit board for the transmitter is within the key fob case. The circuit board should be able to display one or two 8-digit numbers. Take note of the first number sequence and follow the directions in this guide to register the code in your vehicle's system. For older models, this procedure may require a visit the dealer.