Patio Door Lock Repairs

Over time, patio doors go through wear and tear which can result in locks that fail. There are a few simple steps you can take to restore the security of your uPVC door.

These simple fixes can make your home safer, whether you realign the lock or clean the mechanism.

Clean the Lock

Patio doors are ideal for bringing the outdoors in and keeping the elements out. However they could pose an issue for security if the lock doesn't work correctly. With time wear and tear extreme cold and hot weather dirt and debris could cause damage to the lock of your patio door and cause it to become difficult to open. With a little effort you can ensure that the lock on your patio glass door repair near me door is always working in a proper manner.

It is essential to first clean the patio door lock and all moving parts. This will help remove any dirt and coatings that could be preventing the lock from functioning in the way it should. Begin by wiping down all the moving parts of your local patio door repairs door lock with a wet cloth. Then you can use a scouring paper or a damp, rough cloth to scrub the dirt-infested parts of the door and frame. Then, wipe the lock down using a dry towel to get rid of any moisture. Let it air dry before using it.

If you have an exterior door that is fitted with a pin tumbler latch mechanism You can lubricate the lock by applying powdered graphite to the key or by using a lubricant made of Teflon, such as WD-40 Multi-Use Product. This type of lubricant is easy to apply, and it won't disintegrate over time. If you're unable to locate an appropriate lubricant you could use a pencil with an extremely sharp tip. Put the pencil into the lock and jiggle it around a bit to distribute the graphite.

Regular maintenance is also required to keep the tracks of sliding patio doors clear from dust, dirt and other debris. These tracks are especially susceptible to ice, snow, and other debris that could cause them to jam or bind. This can make it difficult for your patio door to be opened and closed.

The sliding rails of the patio door track and rollers can be cleaned by removing any weather stripping that is damaged or dirty, cleaning them, then replacing it. The same can be done for patio door rollers, which can be wiped down and sprayed with non-stick lubricant in order to allow them to move freely.

Lubricate the moving parts

uPVC french doors, which are similar to sliding patio doors, operate using 3-4 or sometimes 5-point locking mechanisms that include the handle and lock cylinder operated by keys. They require maintenance and oiling of the moving parts. This can be accomplished using an oil that is thin (never WD40) and is recommended to be done at least once per year.

If sagging hinges don't cause the problem it could be because the door is not aligned. It may be rubbing against or catching the hole of the strike plate in the frame.n if you find any signs of wear or damage.

Once you've identified the type of lock replacement that you require It's time to begin the actual repair patio doors. The spindle and handle must be removed from the patio door. Install the new handle. Begin by installing the handle in the interior and aligning it with the spindle and then securing it with the two screws or bolts which hold it. Install the exterior handle following the interior handle. Once you have completed these steps Test the handles to make sure they can be shut and open easily and that the latch works properly with the strikeplate.

Make sure the door's strike is checked

The strike plate and the door latch are two components that work together to secure the door. If these are misaligned and the latch doesn't latch the door shut properly. This is typically easy to solve.

Examine the holes that receive the strike plate to make sure they are free of obstructions, such as dirt or plastic plugs. Loosen the keeper screws holding the strike plate in place. This allows it to move vertically but it will not be able to separate from the frame. Adjust the strike plate to align its holes for receiving with the latch hooks of the door latch. Once the strike plate is adjusted, tighten the screws and test the door to see whether it shuts easily with the new adjustment.

Door strike plates can be a bit difficult to access for homeowners with sliding patio doors, however they're essential for locking and unlocking your door. These metal plates are located between the top and bottom jambs of your door, which are where they help support the latch. The door latch slides into the strike plate and forms a seal. If the strike plate is damaged or rusted, or if it is not installed correctly the latch might not be able to lock the door properly.

A misalignment of the latch and strike plate is the most common reason for a patio lock to not close or stay. This can be confirmed using the "lipstick" test. Rub some lipstick along the edge of the deadbolt and then cover it with masking tape. When you close the door, the lipstick will leave a mark on the tape, indicating you exactly where the latch meets the strike plate. If the mark is too high or low it is possible to alter the strike plate.

If your patio door locks for sliding patio door repairs are not working properly, they can keep your home secure from intruders. It is imperative to resolve this issue as quickly as you can. By following these easy steps, you'll be able to fix the lock on your patio door lock repair door and regain its functionality within a short time.