patio door lock repairs (his response)

Over time, the wear and tear can lead to lock malfunctions. There are a few simple steps you can take to ensure the security of your uPVC door.

It's about realigning the lock or cleaning the mechanism that locks, these quick fixes can increase the security of your home.

Clean the Lock

Patio doors are great to let the outdoors in while keeping out the elements. However they can pose a security threat in the event that the lock isn't working properly. Over time, wear, tear, hot and cold weather, dirt, and debris can cause your patio door lock to become difficult to operate. With a little attention you can ensure that the lock on your patio door always works in a proper manner.

It's important to first clean the patio door lock and all moving parts. This will help flush out any accumulated grime and coatings that could hinder the lock from working as it should. Start by wiping all the moving parts on your patio door lock with a wet cloth. Then, use a scouring cloth or rough damp cloth to scrub the areas that are soiled of the door and frame. It is recommended to wipe the entire lock with a dry cloth to remove any remaining dampness and let it to dry completely before using it again.

If you have an outdoor door that has a pin tumbler latch mechanism You can grease the lock by applying powdered graphite to the key or by using a lubricant made of Teflon, such as WD-40 Multi-Use Product. This kind of lubricant can be applied easily and does not dissolve over time. If you're unable to find a suitable lubricant You can use a pencil with an extremely thick tip. Place the pencil in the lock and jiggle it around to spread the graphite.

Regular maintenance is also required to keep the tracks of sliding patio doors free of dust, dirt and other debris. These tracks are especially vulnerable to snow and ice which can cause them to jam or bind, making it harder for your patio doors to open and close.

Sliding patio door track rails and rollers can be cleaned by removing any dirty or damaged weather stripping, cleaning them, then installing it. Patio door rollers can also be cleaned and sprayed down with a nonstick lubricant.

Lubricate the Moving Parts

uPVC french doors, similar to sliding patio doors, operate with 3-4 or sometimes five-point locking mechanisms, which include the handle and lock cylinder operated by a key. These doors also need maintenance, and specifically lubrication of the moving parts. This can be done with the use of a thin oil, but never WD40. It should be done at least once a year.

If sagging hinges aren't the reason, the door could be misaligned and caught or hitting the strike plate hole in the frame. Remove the strike plate and employ a sharp tool to expand its mortise. This will permit the latch to fit into the hole and also prevent it from scratching against the frame.

Find the length of the cylinder using an object of wood or a book that can be inserted into the gap above the adjustment screw. The outer dimension isent-Windows-150x150.jpg">After you've determined the type of lock replacement that you require Now it's time to start the actual repair. The spindle and handle should be removed from the patio door. Install the new handle. Begin by installing the interior handle. Align it with the spindle and then secure it into by using two bolts or screws. Install the exterior handle following the interior handle. Once you have completed these steps, test the handles to ensure that they are able to open and close easily and that the latch is in contact properly with the strikeplate.

Check the Strike on the door.

The door latch and strike plate are two parts of the lock that work to ensure that the latch locks the door. A misaligned strike plate or door latch will cause the latch to not latch the door properly. Fortunately, this problem is usually simple to fix.

Check the holes for receiving of the strike plate to make sure they are free of obstructions like dirt or plastic plugs. Then, loosen the keeper screws that keep the strike plate in place, allowing it to move vertically, but not separating it from the frame of the door. Adjust the strike plate so that it aligns its holes for receiving with latch hooks of the door latch. Once the strike plate is adjusted then tighten the screws and then test the door to see whether it locks smoothly after the new adjustment.

Door strike plates can be a bit difficult to access for homeowners with sliding glass patio door repair patio doors, however they're crucial to lock and unlock your door. These metal plates are located between the top and bottom jambs of the door where they serve as the support for the latch. The door latch is able to slide into the strike plate to create an airtight seal when closed. If the strike plate is damaged or rusted, or if it is not properly installed the latch might not be able to lock the door properly.

The most common reason for an outdoor door lock to not close or not close is a misalignment between the latch and strike plate. This can be checked with the "lipstick" test. Apply some lipstick on the outside of the deadbolt, then cover it with masking tape. The lipstick will leave the mark when you shut the door. This will reveal exactly where the latch meets the strike plate. If the mark is too high or low, you can alter the strike plate.

Sliding patio door locks help keep your home safe from burglars. If they're not working properly, you need to solve the issue fast. By following these simple steps, you can repair patio doors the lock on your patio door and get it back to normal within a short time.