How to Change a Dead Volvo C30 Key Fob

The volvo v40 key programming C30 is a good car, but it has some imperfections. It's extremely comfortable and well equipped for its two front seats, but rear seats are cramped and the cargo space is limited.

If your Volvo key won't turn it is likely due to a range of issues. Certain keys require programming and should only be done by a dealer or automotive locksmith.

How to change the blade of the key

If your Volvo key fob is not working due to a dead battery however, you might still be able to unlock your car using the mechanical blade that is inside. In the majority of new Volvos, there is an internal mechanical key that can be used to open the door of the driver in an emergency if remote keys do not work. You can also utilize the mechanical key to turn on the vehicle in the event that the push-start button on your Volvo is activated by the sensor when you enter the vehicle.

To access the blade of the key, hold the fob with its "Volvo Cars" logo upside down. Find the small black button at the left-hand side of the key fob. Slide it downwards and to your right. This will let you remove the cover and allow you to access the hidden key blade.

The key fob battery is simple to replace. Slide the cover for the key fob off of the key ring, then carefully remove the back of the cover until you can view the inside. It should be apparent that the battery is a standard CR 2032 watch-style cell. Replace the old battery with the new one. Be careful not to touch either of the + or - poles of the battery by using your fingers. The batteries are available in most grocery stores and pharmacies.

How to change the battery

The key fob has one battery that will require Replacement Volvo Xc60 Key at some point in the ownership of your vehicle. It also has a mechanical care key volvo blade that will allow you to unlock the driver door when the remote battery is dead or the keys are lost.

The battery can be replaced quickly, but be careful not to damage the contacts of the electric wires within this cover. fob. A small flathead screwdriver or a pry bar tool made of plastic can be used for prying up the corner of the cover. After removing the cover, you can change the battery by inserting a brand new silver button-cell (CR 2430 3-volt) with the "+", positive side facing downwards, and the "" negative side toward you.

When the new battery has been installed, the fob can be reassembled and a key blade can be inserted. The alarm will be deactivated by pressing the unlock button only once. If you press it twice the doors will be unlocked, and the tailgate will be opened if your car has one.

Many pharmacies and supermarkets offer batteries that are replacements. They are marketed as watchbatteries and are sold with an id in the upper right corner of your key fob. Then you can remove the battery that was in place and replace it with a new one. This should take just 30 minutes or less.

If you have a newer Volvo model that has remote window roll down, you can even manage this feature using your Volvo key fob. You can also utilize the lock button to close the sunroof and windows (if fitted). When you hit the unlock button on the Volvo key fob of the SUV, the alarm will be disengaged and the driver's side door will become unlocked. The other doors as well as the tailgate will be unlocked when you press it twice in succession.

It's time to replace the remote key battery in the event that you see "REMOTE BATTERY LOW VACUUM" in your car's instrument cluster, or if the locks don't respond when you are within the range. Replacing the remote key battery is an easy and quick procedure that can be completed in just a few minutes at home or through your local dealer.